AEM Air Inlet Temperature Sensor Kit 3/8″ (30-2010)

Description

AEM Air Inlet Temperature Sensor Kit 3/8″ (30-2010) for Evo X is available at EvoMotorParts for Mitsubishi Lancer Evolution X owners looking for trusted electronic or sensor components. It is built to support accurate data, reliable operation, and cleaner tuning support on street, track, or restoration-focused setups.

Check the full product overview below for fitment, features, and installation notes before ordering for your Mitsubishi Lancer Evolution X.

AEM 3/8″ air inlet temperature sensor kit (AIT) with 3/8″ NPT male thread, aluminum bung, connector & pins. Senses the air temperature on the inlet side of the engine.Includes:• Air Temp Sensor with 3/8″ NPT Male Thread• 3/8″ NPT Alumium Bung• Mating Connector• Pins & Wire SealsAEM Install Guide: 30-2010 PDF InstallAEM air inlet temperature sensor kit. Cooler AIT’s mean more horsepower. Keep track of those temps with one of these AEM air inlet temperature sensor kits. Monitoring engine functions can stop a problem early for trouble-free performance.
Accuracy: < 1.5°C / 2.7°F Operating Temp: -40C to 135C / -40F to 275F Resistive Range (Ω): See Table Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil Sensor Body Material: Brass Thread: 3/8" NPT Hex Size: 3/4" Installation Torque: 20Nm / 15 ft-lbs Weight: 33.3g Weatherproof connector Includes mating connector & pins Senses the air temperature on the inlet side of the engine Discounts:We are sorry, but discount codes are not available for AEM products. See more AEM Products